Polair Air Fittings Meets & Surpasses Australian Standards 1460.1, 4129 (int), 3855, 4020. The Only Australian Made Compression Fitting. Does Not Require Chamfering Or Lubrication Of Air Pipe.

 

Polair Air Fittings Information

Polair air fittings are the fastest fitting to install, no pipe chamfering, lubrication or nut removal is required. This advantage becomes even more signification in the larger sizes due to the cumbersome handling of large diameter pipes.

Polair air fittings are fully integrated with no loose components. There is no need for individual assembly of split ring, sealing ring and nut. All that is required is the insertion of pipe and tightening of the nut.

The fitting is quick, easy and error free to assemble. Tapered wedges inhibit the pipe from twisting in many circumstances. Not applicable to slip joiners and slip tees.

Polair air fittings use mechanical advantage of the nut thread to place the seal into a compressed position. This means no resistance when inserting the pipe into the fitting, thus eliminating damage or displacement to the sealing during installation. Polair air fittings will give long and trouble free service due to materials with outstanding resistance to impact, many chemicals, corrosion, weathering and abrasion.

Polair air fittings offer a wide variety of configurations and sizes, with working pressure up to 1600kPa.

Compression Fittings:

Body & Nut: High performance polypropylene (PP) black Bracket bodies are made from brass Stainless steel reinforcment ring on all female bsp threads over 1"

Split Ring: Acetal (POM) Spacer: Nylon (PA) black Seal: Nitrile Rubber (NBR) Tapping Saddle: Body: High performance polypropylene (PP) black Stainless steel reinforcment ring on all female bsp threads over 1" Nuts & Bolts: Zinc electroplated Stainless steel (316) optional

Seal: Nitrile rubber (NBR) black

Threaded Fittings: Body: High performance polypropylene (PP) black